Admil Wet Area Natural Stone Silcone

Admil’s WET AREA Natural Stone silicone range is a premium high quality neutral cure 100% silicone specifically formulated for sealing delicate natural stones like marble and granite to ensure it does not cause any staining while preserving the pristine beauty of your surfaces over time. Engineered with fungicidal and bactericidal agents for long-term protection against mould and fungicide.

 

Building approved BS5889

 

Category:

Description

Admil’s WET AREA Natural Stone silicone range is a premium high quality neutral cure 100% silicone specifically formulated for sealing delicate natural stones like marble and granite to ensure it does not cause any staining while preserving the pristine beauty of your surfaces over time. Engineered with fungicidal and bactericidal agents for long-term protection against mould and fungicide.

ADVANTAGES

Admil’s WET AREA Natural Stone has excellent adhesion to most common building materials including: glass, aluminum, galvanized steel, concrete, wood, ceramic tiles, baths, vanities, cement sheet etc.

  • 100% silicone, contains no extenders
  • Will not cause edge zone discoloration of natural stones.
  • Mould resistant
  • Anti-fungal
  • Highly elastic ±25%
  • Low odour
  • Meets GBCA limits for VOC of max 50g/L

APPLICATIONS

Admil’s WET AREA Natural Stone is ideal in applications such as:

  • Sealing around baths, vanities, kitchens, and shower screens
  • Any area subject to hot and humid, and wet conditions
  • Natural Stone surfaces.

TECHNICAL

PROPERTYTYPICAL RESULT
ColoursLight Grey, Marble Grey, Off White, Transparent, Travertine & White
Technology100% Neutral silicone
Shelf Life12 months
Shore A Hardness
(DIN EN ISO 868)
28 +/- 3
Skin Time
(25oC / 50% RH )
5-8 mins
Joint Movement Capability±25%
Modulus 100% (MPa)
(DIN EN ISO 8339)
<0.4
Tensile Strength (MPa)
(DIN EN ISO 527-2)
1.3
Elongation @ Break
(DIN EN ISO 527-2)
>500%
Elastic recovery
(DIN EN ISO 7389-B)
>70%
Volume shrinkage
(DIN EN ISO 10563)
<5%
Curing after 24 hrs at 23 °C
/ 50% RH
2-3mm
Application Temperature+5 to +40
Operating Temp Range-40 to +220°C
Density (g/cm3)
(DIN EN ISO 1181)
1.01 ± 0.02
VOC Content9 g/L

  • BS 5889 building approved

SUBSTRATES

ADMIL WET AREA NATURAL STONE Silicone will have excellent adhesion to many substrates. Admil Adhesives always recommends to conduct “Pre-Adhesion” Tests on substrates to ensure adequate bond is achieved.

  • Glass
  • Aluminium
  • Galvanised steel
  • Wood
  • Ceramics plastics
  • Most powder coatings
  • Fibreglass
  • Steel
  • Stainless steel

SURFACE PREPARATION

All surfaces must be clean, dry, sound, and free from dust, oil, rust, or any other contamination.

Metals should be cleaned with a non-oily solvent soaked clean cloth, such as PROSIL CLEANER 1. Excess solvent should be wiped from the surface with a clean dry cloth. When used on remedial work all existing sealant must be removed. In some instances, further cleaning or etching may be required.

COLOURS

ADMIL WET AREA NATURAL STONE comes in many colours to suit many trends and substrates.

TranslucentTranslucent Silicone sealant colour
WhiteTranslucent Silicone sealant colour
Light Greylight grey silicone sealant
Off Whitealmond ivory silicone sealant
Marble GreyGrey Silicone Sealant
TravertineTravertine silicone sealant

* Colours may vary without notice or be unavailable. Please call your local representative or office to find out more

DOWNLOADS

Technical Datasheet


Safety Datasheet

Download