Description

Admil’s WET AREA N-600 is a high quality 100% neutral oxime curing silicone adhesive/sealant, containing fungicide to prevent mould growth in hot and humid areas. It is ideal for sealing in bathrooms, kitchens, hotel wash basins, and shower screens etc. It reacts with atmospheric moisture to produce a form in place silicone rubber seal. Weathering and UV resistance is excellent.

ADVANTAGES

WET AREA N-600 has excellent adhesion to most common building materials including: glass, aluminum, galvanized steel, concrete, wood, ceramic tiles, baths, vanities, cement sheet etc.

5-8minute skin time
Low Slump
Movement capability ±25%
Superior Adhesion
Will not corrode metals

APPLICATIONS

WET AREA N-600 is ideal in applications such as:

General purpose glazing and weather sealing BS 5889 building approved
Sealing around baths, vanities, kitchens, and shower screens
Any area subject to hot and humid, and wet conditions

TECHNICAL

SPECIFICATIONS
Cure type	Neutral Cure (100%)
Skin Time	4-8 mins
Cure Time	2mm per day
Movement	+/- 25%
Hardness	28 Shore A
Operating Temp	-60°C to 170°C
Tensile Strength	>2.0 MpA
Uses	Internal / External

BS 5889 building approved

SUBSTRATES

WET AREA N600 will have excellent adhesion to many substrates. Admil Adhesives always recommends to conduct “Pre-Adhesion” Tests on substrates to ensure adequate bond is achieved.

Glass
Aluminium
Galvanised steel
Wood
Ceramics plastics
Most powder coatings
Fibreglass
Steel
Stainless steel

SURFACE PREPARATION

All surfaces must be clean, dry, sound, and free from dust, oil, rust, or any other contamination.

Metals should be cleaned with a non-oily solvent soaked clean cloth, such as PROSIL CLEANER 1. Excess solvent should be wiped from the surface with a clean dry cloth. When used on remedial work all existing sealant must be removed. In some instances further cleaning or etching maybe required.